A15 |
|
| E |
G | F |
|
Install the wiring cover plate. Make sure all wiring connections are inside the box or under the wiring cover plate.
A17 |
Connect wiring from the motor to the wiring cover plate.
A16 |
0 |
Connect 4” duct and vent to the outside. Tape joints. If ducting does not fit securely, an adapter may need to be purchased.
A18 |
H |
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
A19 |
I |
Secure the motor by tightening the 2 screws.
7
A20 |
Turn on the power source.
