C29
Go to step
E1
on page 18
to attach grille.
Existing Construction – accessible only from below
D11 EXISTING FAN
D12
E |
Remove an existing fan and check to make sure the opening | Move the housing into position above the ceiling. |
is large enough to accommodate the new motor housing (8”x |
|
8.5”). |
|
D13
Pull wires through strain relief.
15
D14 |
2 |
1 |
Attach existing ducting to duct connector. Tape joints.
If ducting does not fit securely,
an adapter may need to be purchased.
