ENGLAND
O 
(starts at page 56)
Keep the engine stop lever (14) depressed during machine operation. When the lever is released, the engine stops.
MOWING
To cut the grass, push the lawn mower manually or insert the automatic advance gear.
P |
|
| (starts at page 56) |
|
| ||
|
|
|
|
Keep the engine stop lever (14) depressed during machine operation. When the lever is released, the engine stops.
MOWING
To cut the grass, push the lawn mower manually or insert the automatic advance gear. Before proceeding with the coupling of the automatic feed, choose the speed by means
of the change lever (20).
Q |
|
| (starts at page 56) |
|
|
|
|
|
|
|
|
With engine running, pull the handle (14) towards the bar and keep depressed. Push the blade engagement lever (19) forward to make the blade rotate.
R | (starts at page 56) |
MOWING | |
To cut the grass, push the lawn mower manually or insert the automatic advance | |
| gear. |
|
Before proceeding with the coupling of the automatic feed, choose the speed by means of the change lever (20).
How to insert automatic advance: Lift up the clutch handle (18) and keep it pressed in position.
CAUTION: Engage the gear only when the engine is running.
How to disengage advance: Release the clutch handle.
Change the speed with the clutch disengaged. There are 3 speed settings. 1°~ 0,6 m/s
2°~ 0,9 m/s 3°~ 1,2m/s
How to insert automatic advance: Lift up the clutch handle (18) and keep it pressed in position.
CAUTION: Engage the gear only when the engine is running.
How to disengage advance: Release the clutch handle.
WARNING! When the handle (14) is released the blade stops while the motor continues running.
Change the speed with the clutch disengaged. There are 3 speed settings. 1°~ 0,6 m/s
2°~ 0,9 m/s 3°~ 1,2m/s
How to insert automatic advance: Lift up the clutch handle (18) and keep it pressed in position.
CAUTION: Engage the gear only when the engine is running.
How to disengage advance: Release the clutch handle.
S
T
(starts at page 56)
Important: If, when you press the clutch lever, the automatic advance gear does not engage, the clutch cable should be adjusted by inserting the spring (P) in one of the subsequent holes in the plate (R) or in the hole "S" .
AUTOMATIC ADVANCEMENT (starts at page 57)
Periodically check the automatic advance assembly and make sure to keep it clean. In particular, the pinion (21) and the gear (22) must be kept perfectly clean. To carry out this check, you must remove the wheel (23) by unscrewing the screw (24).
SAFETY RULES
Training
a)Persons under 16 years of age and persons who are not familiar with the user instructions must not use the lawn mower.
b)The operator is responsible for the safety of other people in the working area. Keep children and domestic animals at a safe distance when the lawn mower is in use.
c)This machine is to be used exclusively for cutting natural grass. Never use the mower for other purposes (e.g., for flattening out bumps in the ground, such as
d)Work only when there is sufficient light.
e)Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been missed.
Setting up and operating the lawn mower
a)When mowing, wear strong footwear (boots or heavy shoes) and long trousers.
b)Before you start mowing, make sure that the blade and blade fixing screw are securely fastened.
If the blade is damaged, it must be replaced.
c)Turn off the engine, wait until the blade has stopped and remove the spark plug cap before:
ltransporting, lifting or moving the machine away from the working area;
lcarrying out maintenance or cleaning, or when carrying out any operation on the blade;
ladjusting the cutting height;
lleaving the machine unattended.
Caution!The blade starts turning as soon as the engine is started
d)Caution! The fuel is highly inflammable:
lStore fuel in containers specifically designed for this purpose.
lRefuel outdoors only and do not smoke while refuelling.
lFill up the fuel tank before starting the engine. Under no circumstances open the fuel tank cap or add petrol when the engine is running or when it is still hot.
lIf the petrol has overflowed, do not under any circumstances start up the engine.Move the mower away from the area where fuel has bean spilt and avoid any source of possible ignition until the petrol fumes have dissipated.
lReplace the fuel tank cap and tighten it down firmly.
e)Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect..
f)When mowing, never run; you must always walk.
g)Exercise extreme caution when turning or when pulling the lawn mower towards you.
h)Particular precautions must be taken when mowing on slopes or downhill stretches:
lUse appropriate antislip footwear.
lAlways be sure of your footing.
lMow across the face of slopes, never up or down.
lTake great care when changing direction.
lDo not mow on excessively steep slopes.
i)Never use the lawn mower unless the guards and safety devices (e.g. deflector, grass catcher) are securely in position and in good condition.
j)Ensure that the grass catcher and deflector are correctly located. failure to do so may result in foreign objects being ejected by the blade.
k)For reasons of safety, the engine must never exceed the speed. (r.p.m.) indicated on the label.
l)Take care when starting the engine and be sure to follow the user instructions. Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running.
m)Never lift the rear of the mower while starting the engine or during normal operation.
n)If the blade happens to hit any obstacle, stop the engine at once and remove the spark plug cap. Then get an
expert to examine the blade.
Maintenance and storage
a)Make sure that all nuts, bolts, and screws are kept well tightened to keep the mower in a safe operating condition. b)Never leave the machine with fuel in the tank within an enclosed area where the fuel vapours could reach naked
flames or sparks.
c)Allow the engine to cool before storing in any enclosure. d)Keep the engine, silencer, battery compartment and petrol tank free from grass, leaves and excess lubricant,
in order to reduce the danger of fire. e)Frequently check the grass catcher for wear or
deterioration
f)For safety reasons, be sure to replace
g)If the fuel tank has to be drained, it is essential that this be done outdoor.
h)Assemble the blades following the corresponding instructions and use only blades bearing the maker's name or the trademark of the manufacturer or supplier and marked with the reference number.
i)To protect hands during disassembly or assembly of the blades, it is absolutely essential to wear suitable protective gloves.
10
