Husqvarna 16 H !

16 – English

Mowing pattern

DRIVING

4. Push in the lock button on the lift lever and

lower down the cutting unit.

IMPORTANT INFORMATION

The service-life of the drive belts in-

creases considerably if the engine is run

at low speed when engaging the blades.

For this reason do not increase the throt-

tle until the cutting unit has been lowered

to the cutting position.

• Localise and mark stones and other fixed

objects to avoid collision.

• Start with a high cutting height and reduce down

until the required cutting result are obtained.

• The cutting results are best with a high engine

speed (fast rotating blades) and low driving

speed (slow moving machine). If the grass is not

too high and thick the driving speed can be

increased or the engine speed reduced without

noticeably affecting the mowing results.

• The best lawns are achieved if the grass is cut

often. Mowing becomes more uniform and the

grass cuttings become more evenly distributed

over the surface. The total time consumption is

not greater since it is possible to select a higher

driving speed without inferior mowing results.

• Avoid mowing a wet lawn. The mowing results

are inferior since the wheels sink down into the

soft lawn.

• Wash down the underside of the cutting unit with

water after use. Do not use a high pressure jet.

Put the cutting unit in the service position while

doing this.

!WARNING!

Clear the lawn from stones and

other object which can be thrown

out by the blades.