PRESENTATION
Cutting unit
The Rider 16 can be fitted with four different cutting units.
Rear ejector - 970 mm
Side ejector | - 970 mm |
BioClip | - 900 mm, 1030 mm |
Combi | - 1120 mm Combi |
See ”Maintenance \ Checking the Blades” for identification of the cutting unit.
Lift lever for cutting unit
The lift lever is used to set the cutting unit in trans- port or cutting position.
If the lever is pulled back the unit will lift up and the blades will automatically stop rotating (transport position).
If the lock button is pressed and the lever is moved forward the unit will be lowered and the blades will automatically start rotating (cutting position).
The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn.
Lifting of the cutting unit (transport position) | |
|
Lowering of the cutting unit (cutting position)
English – 13
