EXPLANATION OF SYMBOLS
These symbols are on the machine and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual
R N
Reverse | Neutral | Fast | Slow | Engine off | Battery | Choke | Fuel |
Oil pressure | Cutting height | Backwards | Forwards | Ignition |
Hydrostatic free wheel | Use eye and hearing protection | Parking brake | Brake | Warning |
Noise emission to surroundings in accordance | Warning! | Warning! | Never drive across a | CE conformity |
with the directive of the European Community. | Rotating blades. | Risk that the | slope | marking |
The machine’s emission is indicated in the |
| machine can tip over |
|
|
chapter TECHNICAL DATA and on the decal. |
|
|
|
|
Never use the machine if persons, especially | Never carry passengers on the |
children, or animals, are in the vicinity. | machine or equipment. |
Starting instructions Read the instructions Check the engine’s oil level Check the hydrostat’s oil level Lift up the cutting unit
Put the hydrostat pedals in the neutral position
Brake
If the engine is cold use the choke Start the engine
Release the parking brake before driving
Keep hands and feet away | Drive very slowly |
from under the hood when | without the cutting unit. |
the engine is running. |
|
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off the ignition cable before repairs or maintenance
4 – English
