Husqvarna 2003-06 manual 10 cm

INSTALLATION

Remember the following with regard to the working area boundaries:

•If a high obstacle, for example a wall or fence, bor- ders the working area, the boundary wire should be laid 35 cm from the obstacle. This will prevent the Auto Mower from colliding with the obstacle and reduce body wear.

•If the working area borders against, for example, pools of water the boundary wire should be supple- mented with a fence or the like. The height must then be at least 10 cm. This will prevent the Auto Mower, under any circumstances, coming outside of the working area.

35 cm

3012-229

•If the working area borders against a small ditch, for example, a flower bed or a small elevation, e.g. a low verge (3-5 cm), the boundary wire should be laid 30 cm inside the working area. This prevents the wheels from driving into the ditch or up onto the verge.

30cm

3012-228

•If the working area borders against a flat path or the like that lies level with the lawn, is it possible to allow the Auto Mower to run a little over the path. The boundary wire should then be laid 10 cm from the edge of the path.

10 cm

3012-230

English-19