SAFETY INSTRUCTIONS
Transport
The original packaging should be used when transport- ing the Auto Mower over long distances.
To safely move from or within the working area:
1.Press the STOP button to stop the mower.
If the stop protection, (see page 36) used as to prevent theft, has been activated enter the first number of the
You select the four digit PIN code when you start the mower for the first time, see page 25.
2.Switch off the main switch if the mower is to be moved outside of the working area.
3.Carry the mower by the handle at the rear under the mower. Carry the mower with the top against your body.
Maintenance
WARNING
When the mower is turned upside down the main switch must always be set to the OFF position.
The main switch should be set to the OFF position with all work on the mower’s underframe, such as cleaning or replacing the blades.
The beeps (5 beeps in 5 seconds) warn that the blade disc is about to start, if the beeps are not audible the Auto Mower is set to sound off.
•Inspect the Auto Mower each week and replace any damaged or worn parts.
Check especially that the blades and blade disc are not damaged. Replace all blade units at the same time if necessary so that the rotating parts are bal- anced, see ”Maintenance” on page 43.
ON
OFF
