INSTALLATION
•In order for the loop system to work well, the wires in passages where the Auto Mower is to run through must not lie too close together.
A passage should be at least 2 metres wide so the Auto Mower can find it and make its way through it. The minimum spacing between the wires in a pas- sage is 130 cm.
The transition between a large area and a passage should be, if possible, designed like a ”funnel”, with rounded corners, to make it easier for the Auto Mower to enter the passage.
Secondary |
area |
Main area |
2m |
C. Placing the charging station
1.Place the charging station according to your plan.
2.Connect the low voltage cable to the charging sta- tion.
Only Husqvarna original cable and transformer may be used.
3.Connect the low voltage cable to the transformer.
The connectors may be a slightly difficult to con- nect, as they are
4.Connect the transformer’s power cord to a 230V wall socket. It is preferable to use an
