PRESENTATION

Function Auto Mower

Working method

The Auto Mower automatically mows the lawn. It con- tinuously combines mowing and charging.

When the Auto Mower works on a lawn, it simulta- neously stores information about how the garden is shaped.

The charging station sends out a signal that the Auto Mower can sense at a distance of 6 - 8 metres. The mower starts to seek out the charging station when the capacity of the battery becomes too low. The Auto Mower does not mow when it is searching for the charging station.

3012-233

When the battery is charged the mower reverses, turns around and leaves the charging station in a randomly selected direction within the exit sector 90°-270°. Both the reversing length and exit direction can be set, see ”3. Installation” on page 32.

3012-225

When the Auto Mower body hits an obstacle, the mower reverses and selects a new direction.

Two sensors, front and back on the Auto Mower, sense when the mower approaches the boundary wire. The Auto Mower overruns the wire by up to 27 centimetres before it turns. The overrun length can be set, see ”Drive past wire (3-2)” on page 34.

3012-226

English-10

Page 9
Image 9
Husqvarna 2003-06 manual Function Auto Mower, Working method