Husqvarna 2003-06 Installation, Charge exit settings, Drive past wire, Garden shape, Check loop

MENU FUNCTIONS

3. Installation

Via this option in the main menu you access the driving settings. Select among the submenus:

•Charge exit settings (3-1)

to set how far the Auto Mower should reverse out of the charging station before it turns and in what direction the mower should leave the charging sta- tion.

•Drive past wire (3-2)

to set the distance over the boundary wire that the Auto Mower should drive.

•Garden shape (3-3)

to tell the Auto Mower which type of garden you have.

•Check loop (3-4)

to check that the loop is intact or exactly where in the lawn the wire is.

Charge exit settings (3-1)

Normally the Auto Mower leaves the charging station in a direction within the exit sector 90°-270°, where 90° is called the begin angle and 270° is called the end angle. By manually setting the exit direction you can control how the Auto Mower should leave the charging station. If the charging station is located in a passage you can get the best access to all lawns by using this function.

Auto Mower can be set for one or two exit sectors.

Commands

Timer

Installation

Settings

Charge exit settings

Drive past wire

Garden shape

Check loop

3-

3012-225

Use begin and end angle 1 in the menu ”Customized” if you want to use one sector.

3012-245

English-32