Husqvarna 230 ACX/220 AC manual Test OUT

6. MENU FUNCTIONS

• Test IN (3-2-4)

The Test IN (3-2-4)function is used to test how	Follow loop out
Automower finds its way into the charging
station.
	Follow loop in
	Corridor width
	Test IN
	Test OUT
	3-2-4
When the function is selected the mower will
immediately follow the boundary wire, guide 1 or
guide 2, depending on which one it finds first, in
to the charging station. If there is a passage and
the mower can not run through it, the Corridor
width value is set too high. When Test IN is
activated, the mower runs at the greatest
distance from the wire that the selected corridor
width permits.
The adjacent picture shows how Automower
negotiates a passage when a value of 5 is set for
the Corridor width, but not when a value of 6 is
set.
	3012-672

IMPORTANT INFORMATION

When Test IN (3-2-4)is used, the house icon on the display will come on and the mower will remain in the charging station. Press the Home button to return to operations.

•Test OUT (3-2-5)

The Test OUT (3-2-5)function is used to try different charge exit settings and to find out how far it is from the charging station to a remote area.

To test the settings for Follow loop out (3-2-1):

•State the value 100 % for Proportion for the remote area to be tested. Place Automower in the charging station and select Test OUT (3-2-5). The mower will now leave the charging station directly according to the stated direction and start mowing after the stated distance. Reset the Proportion value when testing is finished.

Follow loop out

Follow loop in

Corridor width

Test IN

Test OUT

3-2-4

56 - English