3012-260 | Husqvarna 230 ACX/220 AC specification

8. MAINTENANCE

To replace the blades:

1. Set the main switch to the OFF position.

2. Wear protective gloves.	OFF

3012-288

3012-272

3.Turn Automower upside down.

4.Rotate the skid plate so that its hole aligns with the screw for the blade.

5.Unscrew the blade. Use a straight slot or cross-tip screwdriver.

3012-260

6.Pry apart the skid plate and blade disc a little and remove the blade and screw.

7.Screw tight the new blade.

English - 73

Image 72

Husqvarna 230 ACX/220 AC manual 3012-260

Contents

Husqvarna Automower 230 ACX/220 AC OPERATOR’S Manual Table of Contents Table of Contents Introduction Safety Introduction Symbols on Automower Symbols in the Operator’s Manual Safety instructions Use Maintenance Transport Presentation Automower, what’s what? Numbers in the picture correspond to Function of Automower CapacityMowing technique Working method 3012-388 3012-700 3012-400 Search method Movement patternSearch method 1 Irregular Search method 2 Follow boundary wire Search method 3 Follow guide wire More than one Automower in a garden One Automower in several gardens Installation Carry out the installation in the following steps Installation of the charging station PreparationsIdeal position of the charging station Low voltage cable must not be extended Transformer is for indoor use only 3012-744 Installation and connecting the charging station Do not tread or walk on the charging station plate Charging the battery Installation of the boundary wireBest position for the boundary wire Boundaries for the working area 3012-459US Boundaries within the working area Secondary areas Passages when mowing Passages when searching for the charging station Slopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wire Connecting the boundary wire 3012-284 3012-264 3012-265 3012-507 Checking the installation Linking Automower to the charging station Installation of the guide wire Need of a guide wire Placement and connection of the guide wire Maximum 135º Charging a discharged battery Use Using the timer Starting AutomowerStopping Automower Switching off Automower RestartRestart within 20 seconds Restart after more than 20 seconds Adjusting the cutting height Control panel Shortcuts Programs Select Main switch Numbers Menu functions Main menuBrowse between menus Number series Commands Timer Garden Settings Automower main menu Commands Timer Timer override Day timerWeekend timer Week timer GardenMon Tue Wed Thu Fri Sat Sun Run all Exit angles Follow loop Proportion firstFollow loop out Direction DistanceProportion Follow loop Corridor width Test Test OUT Garden shape OpenNormal Complex Drive past wire AdvancedCheck loop Settings SecurityPIN code Time lock Stop protection Settings lock SoundsOperation Keypad Language Sound Significance Time and date Set timeSet date Time format Proposed installation and settings Garden example 3012-543 3012-544 3012-545US Corridor width Guide 1 This example only applies to 230 ACX 3012-687US Maintenance Battery Service Winter storageAfter winter storage Automower Cleaning Underframe and blade disc Do not use running water when cleaning Replacing the bladesChassis Wheels 3012-260 Trouble shooting Fault messages Trouble Shooting Fault symptom Technical data Data Automower 230 ACX Automower 220 AC Environmental Information Serial number Personal code Dealer Dealer’s telephone number Index Auto Follow loop Follow loop out Shortcuts Control panel Menus Working area Boundaries 115 03