3. INSTALLATION

The longer the guide wire, the closer the mower follows the guide wire. If the guide wire is longer then 984 ft, the mower may find it difficult to follow the wire. This varies depending on the design of the garden and installation.

2.Lift up the cover on the charging station.

3.If you intend to install guide 1:

Insert the end of guide 1 into the lower right-hand hole on the charging station and catch it in the upper hole.

Secure a connector on the guide wire.

Connect guide 1 to the contact pin on the charging station marked guide 1.

If you intend to install guide 2:

Insert the end of guide 2 into the lower left-hand hole on the charging station and catch it in the upper hole.

Secure a connector on the guide wire.

Connect guide 2 to the contact pin on the charging station marked guide 2.

4.Route the cable straight under the charging station plate.

5.Route the guide wire at least 7 ft straight out from the front edge of the charging plate.

3012-650

3012-538

Maximum

distance

At least 12"

At least

7 ft

3012-648

36 - English

Page 35
Image 35
Husqvarna 230 ACX/220 AC manual Maximum