English - 45
6. MENU FUNCTIONS
6.5 Installation (3)
From this option in the main menu you access the
driving settings.
• Exit angles (3-1)
to set how far Automower
®
should reverse out of
the charging station before it turns and in what
direction the mower should leave the charging
station.
• Follow loop (3-2)
to guide the mower to easily reach a remote area
of the garden, to make it easier to find the
charging station and to determine at what
distance the mower shall follow the loop.
• Installation shape (3-3)
to tell Automower
®
which type of garden you have.
• Advanced (3-4)
to check that the loop is intact or the exact location
of the cable in the lawn, and also to set the
distance over the boundary wire that Automower®
should run.
For examples of garden settings, see
7. Garden
example
on page 56.
Exit angles (3-1)
Normally Automower
®
leaves the charging station in
a direction within the exit sector 90°-270°, where 90°
is called the
Start angle
and 270° is called the
End
angle
. By setting the start and end angles, you can
set the direction in which Automower
®
is to leave the
charging station.
• Reversing distance (3-1-1)
Specify the number of centimetres you want
Automower
®
to reverse before it turns to drive
out of the charging station.
The default reversing distance is 60 cm.
• Start angle 1 (3-1-2)
Specify in degrees where you want the
sector/sector 1 to start.
• End angle 1 (3-1-3)
Specify in degrees where you want the
sector/sector 1 to end.
3-
3
Exit angles
Follow loop
Installation shape
Advanced
Commands
Timer
Installation
Settings
3-1
3-1-
Reversing dist.
Start angle 1
End angle 1
Exit angles
Follow loop
Installation shape
Advanced