Fuel Handling

Fuel

Note! The machine is equipped with a two-stroke engine and must always be run using a mixture of gasoline and two-stroke oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

	!	WARNING! Always ensure there is
	!	adequate ventilation when handling fuel.
		adequate ventilation when handling fuel.

Gasoline

•Use good quality unleaded gasoline.

•CAUTION! Engines equipped with catalytic converters must be run on unleaded fuel mixtures. Leaded gasoline will destroy the catalytic converter and it will no longer serve its purpose. The green fuel cap on saws ﬁtted with catalytic converters means that only unleaded gasoline can be used.

•The lowest recommended octane grade is 87 ((RON+MON)/2). If you run the engine on a lower octane grade than 87 so-called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

•When working with continuous high revs (e.g. limbing) a higher octane is recommended.

Environment fuel

HUSQVARNA recommends the use of alkylate fuel or environmental fuel for four-stroke engines blended with two-stroke oil as set out below. Note that carburetor adjustment may be necessary when changing the type of fuel (see instructions under the heading Carburetor).

Running-in

Avoid running at a too high speed for extended periods during the ﬁrst 10 hours.

Two-stroke oil

•For best results and performance use HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two stroke-engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

20 – English

Mixing ratio

1:50 (2%) for all engines.

Gasoline, litre	Two-stroke oil, litre

	2% (1:50)

5	0,10

10	0,43/0,20

15	0,30

20	0,40

US gallon	US ﬂ. oz.

1	2 1/2

2 1/2	6 1/2

5	12 7/8

Mixing

•Always mix the gasoline and oil in a clean container intended for fuel.

•Always start by ﬁlling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

•Mix (shake) the fuel mixture thoroughly before ﬁlling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

Chain oil

•We recommend the use of special oil (chain oil) with good adhesion characteristics.

•Never use waste oil. This results in damage to the oil pump, the bar and the chain.

•It is important to use oil of the right grade (suitable viscosity range) to suit the air temperature.

•In temperatures below 32°F (0°C) some oils become too viscous. This can overload the oil pump and result in damage to the oil pump components.

•Contact your service agent when choosing chain oil.

115 13 82-96 Rev.1 2009-03-26

115 13 82-96, 460 Rancher specifications

The Husqvarna 115 13 82-96,460 Rancher is a powerful and versatile chainsaw designed to meet the needs of both homeowners and professionals. This model is particularly well-suited for those who require a reliable tool for light to medium-duty applications, such as tree trimming, pruning, and firewood cutting.

One of the standout features of the 460 Rancher is its impressive 60.3cc X-Torq engine. This engine delivers excellent power while ensuring optimal fuel efficiency and reduced emissions. The X-Torq technology minimizes fuel consumption by up to 20% compared to standard engine designs, making this chainsaw environmentally friendly and cost-effective to operate.

The 460 Rancher is equipped with a durable 18-inch guide bar, allowing for a deeper cutting capacity. Coupled with a high-performance chain, it provides smooth cutting performance through various types of wood. The chainsaw’s automatic oiling system ensures that the bar and chain receive adequate lubrication while in use, extending the lifespan of components and improving performance.

User comfort and ease of use are further enhanced by the lightweight design and ergonomic handle. The front handle features an anti-vibration system that reduces fatigue during extended use, allowing operators to work for longer periods without discomfort. Moreover, the chainsaw includes a quick-release air filter that simplifies maintenance, making it easy to keep the tool in top working condition.

Another notable technology in the 460 Rancher is the Smart Start system, which allows the chainsaw to start with minimal effort. This feature is particularly beneficial for users who may not be as experienced with starting a chainsaw, making the tool accessible to a wider audience.

Safety features are also a priority with the Husqvarna 460 Rancher. It comes with a chain brake that automatically activates in the event of kickback, providing an additional layer of protection for the user. The chainsaw is also designed with a throttle lockout, preventing accidental throttle engagement.

Overall, the Husqvarna 115 13 82-96,460 Rancher is an exceptional chainsaw that combines power, efficiency, and user-friendly features. Whether for cutting firewood, tackling yard work, or handling forest jobs, this model stands out as a reliable and effective tool in the Husqvarna lineup.

Husqvarna 460 Rancher, 115 13 82-96 manual Fuel Handling

Models: 115 13 82-96 460 Rancher

FUEL HANDLING