MAINTENANCE

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter

must always be replaced.

A HUSQVARNA chain saw can be equipped with different types of air filters according to working conditions, weather, season, etc. Contact your dealer for advice.

Spark plug

The spark plug condition is influenced by:

•Incorrect carburetor adjustment.

•An incorrect fuel mixture (too much or incorrect type of oil).

•A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm). The spark plug should be replaced after about a month in operation or earlier if necessary.

Note! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder. Check that the spark plug is fitted with a suppressor.

Lubricating the bar tip sprocket

Lubricate the bar tip sprocket each time you refuel. Use the special grease gun and a good quality bearing grease.

Needle bearing lubrication

The clutch drum has a needle bearing on the output shaft. This needle bearing must be lubricated regularly (once a week).

When lubricating, remove the clutch cover by loosening the two bar nuts. Lay the saw on its side with the clutch drum upwards.

Lubrication involves engine oil dripping into the centre of the clutch drum as it rotates.

Adjustment of the oil pump

Adjustments are made by turning the screw using a screwdriver or combination spanner. The machine is supplied from the factory with the screw set to position 2. Turning the screw clockwise will reduce the oil flow and turning the screw anti-clockwise will increase the oil flow.

Recommended settings:

Bar 13"-15": Position 1

Bar 15"-18": Position 2

Bar 18"-20": Position 3

These recommendations apply to Husqvarna’s chain oil, for other chain oils increase the oil flow by one step.

 

!

WARNING! The engine must be stopped

 

when making adjustments.

 

 

 

 

 

115 13 82-96 Rev.1 2009-03-26

English – 37

Page 36 Page 38
Page 37
Image 37
Husqvarna 115 13 82-96, 460 Rancher manual Spark plug, Lubricating the bar tip sprocket, Needle bearing lubrication
Page 36 Page 38

115 13 82-96, 460 Rancher specifications

The Husqvarna 115 13 82-96,460 Rancher is a powerful and versatile chainsaw designed to meet the needs of both homeowners and professionals. This model is particularly well-suited for those who require a reliable tool for light to medium-duty applications, such as tree trimming, pruning, and firewood cutting.

One of the standout features of the 460 Rancher is its impressive 60.3cc X-Torq engine. This engine delivers excellent power while ensuring optimal fuel efficiency and reduced emissions. The X-Torq technology minimizes fuel consumption by up to 20% compared to standard engine designs, making this chainsaw environmentally friendly and cost-effective to operate.

The 460 Rancher is equipped with a durable 18-inch guide bar, allowing for a deeper cutting capacity. Coupled with a high-performance chain, it provides smooth cutting performance through various types of wood. The chainsaw’s automatic oiling system ensures that the bar and chain receive adequate lubrication while in use, extending the lifespan of components and improving performance.

User comfort and ease of use are further enhanced by the lightweight design and ergonomic handle. The front handle features an anti-vibration system that reduces fatigue during extended use, allowing operators to work for longer periods without discomfort. Moreover, the chainsaw includes a quick-release air filter that simplifies maintenance, making it easy to keep the tool in top working condition.

Another notable technology in the 460 Rancher is the Smart Start system, which allows the chainsaw to start with minimal effort. This feature is particularly beneficial for users who may not be as experienced with starting a chainsaw, making the tool accessible to a wider audience.

Safety features are also a priority with the Husqvarna 460 Rancher. It comes with a chain brake that automatically activates in the event of kickback, providing an additional layer of protection for the user. The chainsaw is also designed with a throttle lockout, preventing accidental throttle engagement.

Overall, the Husqvarna 115 13 82-96,460 Rancher is an exceptional chainsaw that combines power, efficiency, and user-friendly features. Whether for cutting firewood, tackling yard work, or handling forest jobs, this model stands out as a reliable and effective tool in the Husqvarna lineup.
Top Page Image Contents