
CONTROLS
Gauges
Water temperature gauge- indicates coolant temperature and warns of overheat situation.
Ammeter - indicates amount of electrical flow at the battery. Under normal operating conditions the needle will be slightly on the plus (+) side of the gauge, showing that current is being supplied to the battery. At idle speed, the indicator may be at zero or on the negative
Oil pressure meter - tells what the pressure is in the oil system and warns if pressure is too low for operation.
Throttle Control
The throttle control regulates the engine speed.
In order to increase or decrease the engine speed, the control is moved forward or backward respectively.
Avoid idling the engine for long periods.
Use full throttle when mowing.
Ignition
1 | 2 | 3 |
Gauges |
|
1.Water temperature
2.Ammeter
3.Oil pressure
1 |
The ignition key is placed in the front console
Throttle control
and is used to start the machine.
1. Throttle control
IMPORTANT INFORMATION
Wait till the glow plug light goes out before turning the engine over. To prolong starter life use short starting cycles, DO NOT exceed 30 s/min.
Hour Meter
The hour meter displays the totoal operating time and reminds of service intervals.
It will flash CHG OIL (Change Oil) at 50 hour intervals. The flash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically. The hour meter can not be manually reset.
2
3
1
Console | |
|
1.Hour meter
2.Glow plug light
3.Ignition