MAINTENANCE

Replacing the Air Filter

If the engine seems weak or runs unevenly and the dust load indicator has turned red the air filter may be clogged. If run with a clogged air filter, disruption of operation can occur. For this reason, it is important to replace the air filter regularly (see the heading Maintenance Schedule for the proper service interval).

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes.

Cleaning/replacing the air filter is carried out as follows:

IMPORTANT INFORMATION

Do not used compressed air to clean the air filter.

Do not wash the paper filter.

Do not oil the paper filter. Do not tap filter to clean this could cause damage to the sealing.

Dust cap

Check the dust cap every day by pressing the rubber valve with two fingers to let out the dirt.

IMPORTANT INFORMATION

The end cover must be installed with the rubber valve pointing downwards, otherwise the rubber valve will not function.

Clean the dust cap by removing the end cover of the the air cleaner and clean inside.

8011-447

Pressing the rubber valve

English-41

Page 43
Image 43
Husqvarna BZ 27, BZ 34 manual Replacing the Air Filter