MAINTENANCE
Filter replacement
1.Unfasten the two plastic clamps on the sides of the air filter cover. Remove the air filter cover.
2.Remove the main filter (outer filter) by pulling it out by hand. Lightly brush or use mild air pressure to clean.
3.Only remove and replace safety element after the paper filter has been replaced 3 or 4 times.
4.Clean inside of the filter housing. Wipe dry only.
5.Install the inner filter with the open end first. Ensure that it enters its recess at the end of the housing and push it in to the end.
6.Install the main filter with the open end first. Ensure that it enters its recess at the end of the housing and push it in to the end.
IMPORTANT INFORMATION
The end cover must be installed with the rubber valve pointing downwards, otherwise the rubber valve will not function.
1
2
1.Dust Load Indicator
2.Clamp
Removing the air filter cover
Paper filter
7.Replace the cover over the air filter housing. Fasten the two plastic clamps making sure the cover is snapped into position.
8.Turn the end cover with the rubber valve pointing downwards and install it.
9.Push top of dust load indicator to reset it.
Safety element
