![](/images/new-backgrounds/1113001/113001119x1.webp)
LUBRICATION
The oil level shall lie between the markings on the dipstick. If the level is approaching the ”ADD” mark, top up the oil to the ”FULL” mark on the dipstick.
Never fill above the ”FULL” mark.
The oil is filled through the hole for the dipstick.
Use engine oil SAE 30 or SAE
Over +68 °F /+20 °C SAE 40 can be used.
Use engine oil SAE
The engine holds 3.5qt/3.3 liters of oil including the filter.
4. Throttle Cable, Lever Bearings
Lubricate the cable ends by the lever with an oil can. Move the controls to the end points and lubricate again.
The throttle cable is also lubricated by the control when the control console is removed.
5. Front Wheel Mount
Lubricate with a grease gun, one zerk for each wheel mount, use 10 pumps of the grease gun at the recommended service intervals. Use only good quality lithium based grease.
Use only good quality molybdenum disulphide grease.
The dipstick markings
Engine oils
Throttle and choke cables by the carburetor