Husqvarna CS 2512 manual Introduction

Operator's Manual CS 2512 Introduction

Introduction

Husqvarna CS 2512 is designed for use together with the hydraulic unit PP 455 E or Husqvarna RC 455. Husqvarna CS 2512 is a powerful and easy to use wire saw with a capacity for really large work, yet at the same time sufficiently compact and mobile for small work. It can be used in many different ways, both on the ground and fitted to the wall.

The well thought-out design of the CS 2512, where the drive wheel is placed on the machine's output side means that the wire is always under tension even when the feed force is low. Combined with the adjustable pressure valve this gives exact control of cutting and unbeatable performance.

The machine can be rigged both vertically and horizontally and many cuts can be made directly without external idler wheels.

Complete saw equipment consists of:

1 x saw unit

1 x accessory box

1 x 18 mm wrench

1 x pressure reduction block

1 x extra wear rubber for the magazine wheel

1 x cleaning brush

English - 7