AB

Eng Adjustment of the cutting unit

A. In the direction of travel

1.Check that the air pressure is correct in all four tires.

2.Make sure that the machine is on a horizontal surface.

3.Lift up the cutting unit to its highest position.

4.Measure the distances A and B.

DEinstellung des Mähaggregats

A. In Fahrrichtung

1.Prüfen, daß der Luftdruck an allen vier Reifen richtig ist.

2.Prüfen, daß die Maschine auf einer ebenen Unterlage steht.

3.Mähaggregat in die oberste Lage anheben.

4.Abstände A und B messen.

2 1

Eng To achieve best cutting results the cutting unit’s front edge (B) should be about 10 mm (0.375") lower than the back edge

(A). Adjust in the following way to raise the back edge:

1. Loosen the nut (1) on both the left and right levers.

2. Screw the nut (2) the same number of turns on both levers.

3. When the correct distance (A) is obtained this setting is

FRéglage du carter de coupe

A. Reglage lateral

1.Vérifier que la pression est correct dans les quatre pneus.

2.S’assurer que la machine est sur un terrain plat.

3.Relever le carter de coupe dans la position la pus haute.

4.Mesurer les distances A et B.

Esp Ajuste de la unidad de corte

A. En el sentido de la marcha

1.Controlar que la presión de inflado es la correcta en los cuatro neumáticos.

2.Asegurarse de que la máquina está sobre suelo horizon- tal.

3.Levantar la unidad de corte hasta su posición más elevada.

4.Medir la distancia A y B.

IRegolazione del tagliaerba

A. Nel senso di marcia

1.Controllare la pressione dei pneumatici.

2.La macchina deve essere in piano.

3.Sollevare al massimo il tagliaerba.

4.Misurare le distanze A e B.

NL Het instellen van de maaikast

A. In de rijrichting

1.Controleer of de luchtdruk in alle vier de banden juist is.

2.Zorg ervoor dat de machine op een vlakke ondergrond staat.

3.Zet de maaikast in de hoogste stand.

4.Meet de afstanden A en B.

Esp Para obtener el mejor resultado de corte, el extremo delantero

(B)de la unidad de corte ha de estar unos 10 mm (0,375") más bajo que el extremo posterior (A). Ajustar de la manera siguiente para elevar el extremo posterior:

1.

Quitar la tuerca (1) en las palancas izquierda y derecha.

2.

Enroscar la tuerca (2) el mismo número de vueltas en las

 

dos palanca.

3.

Cuando se ha obtenido la distancia correcta (a), el ajuste

 

se bloquea con la tuerca (1).

D

locked with the nut (1).

I Per ottenere i migliori risultati, il bordo anteriore del tagliaerba

Für bestes Mähergebnis muß die Vorderkante des Mähaggregats (B) ca. 10 mm tiefer liegen als die Hinterkante

(A). Einstellung zur Erhöhung der Hinterkante:

1.Mutter (1) am linken und rechten Hebel lösen

2.Mutter (2) gleich viele Drehungen an beiden Hebeln verstellen.

3.Wenn der richtige Abstand (A) erhalten wird, sind die

FEinstellungen mit der Mutter (1) zu sperren.

Pour avoir le meilleur résultat de coupe, le bord avant du carter de coupe (B) doit être de 10 mm en dessous du bord arrière (A). Pour relever le bord arrière, procéder de la façon suivante:

1.Dévisser l’écrou (1) sur les supports avant gauche et droit du carter de coupe.

2.Visser exactement de la même façon les écrous (2) sur

les

supports avant du carter de coupe

3.Lorsque la distance (A) est correcte, bloquer le réglage avec l’écrou (1).

(B) deve essere circa 10 mm più basso di quelo anteriore (A).

Regolare nel modo sequente:

1.Allentare il dado (1) sui bracci destro e sinistro.

2.Avvitare il dado (2) di un nuemero identico di giri sui due bracci.

3.Dopo aver raggiunto la distanza corretta (A) bloccare stringendo il dado (1).

NL Om het beste maairesultaat te bereiken, dient de voorkant (B) van de maaikast ca. 10 mm (0,375") lager te staan dan de achterkant (A). Ter verhoging van de achterkant als volgt instellen:

1.Draai moer (1) los op linker en rechter hefboom.

2.Draai moer (2) op de beide hefbomen evenveel slagen.

3.Wanneer de juiste afstand (A) is bereikt, wordt de instelling met de moer (1) vastgezet.

76

Page 76
Image 76
Husqvarna CTH160II Eng Adjustment of the cutting unit, Einstellung des Mähaggregats, Réglage du carter de coupe

CTH160II specifications

The Husqvarna CTH160II is a standout model in the realm of garden tractors, specifically designed to offer efficiency, comfort, and advanced features for homeowners with varying landscape needs. This machine is engineered for durability and performance, making it an ideal choice for maintaining lawns, gardens, and more extensive outdoor spaces.

One of the key features of the CTH160II is its powerful engine. Equipped with a robust Briggs & Stratton engine, it ensures reliable starting and strong performance, even under demanding conditions. The engine delivers a significant amount of horsepower, providing the necessary power for tackling tough mowing and terrain challenges.

The cutting deck on the CTH160II is another notable characteristic. With a 42-inch reinforced cutting deck, it provides a wide cutting path, which enhances efficiency and reduces mowing time. The deck is designed for superior grass collection and is compatible with various cutting heights, allowing users to achieve the desired grass length easily. Additionally, the deck features an innovative washout port, making maintenance straightforward by simplifying the cleaning process after use.

The ergonomics of the CTH160II are worth mentioning as well. The tractor is equipped with a comfortable seat that can be adjusted to accommodate different user preferences, thereby enhancing the overall mowing experience. The steering wheel is also positioned for optimal control, ensuring that the operator can maneuver the tractor effortlessly.

The Husqvarna CTH160II incorporates advanced technologies that enhance usability. Its hydrostatic transmission provides seamless speed control, eliminating the need for shifting gears, which makes it more accessible for users of all skill levels. Furthermore, the tractor features a compact design, allowing it to navigate through tight spaces and around obstacles with ease.

For those looking for versatility, the CTH160II can be equipped with various accessories, including mulching kits, sweeper attachments, and snow removal tools. This adaptability makes it suitable for a range of tasks throughout the year, from mowing to snow clearing.

In summary, the Husqvarna CTH160II combines power, precision, and user-friendly features, making it an excellent choice for homeowners looking to maintain their gardens and lawns efficiently. With its durable construction, thoughtful design, and impressive technological advancements, the CTH160II stands out as an essential tool for outdoor maintenance. Whether for routine mowing or more extensive landscaping tasks, this garden tractor is built to deliver reliable performance season after season.