LUBRICATION

Transaxle (Transmission) Fluid Change

This transaxle is designed with an external filter for ease of maintenance. To ensure constant fluid quality levels and longer life, an oil filter change interval of every 200 hours is recommended.

The following procedure is performed with the transaxles installed in the mower and the mower on level ground. Apply the pump release valve for each transaxle and set the parking brake.

1.Remove the three ¼" filter guard screws and filter guard. Clean any loose debris from around the perimeter of the filter. See illustration.

2.Place an oil drain pan (12" or more diameter and 8 qt. capacity is optimal) beneath the oil filter. Remove the oil filter from the transaxle.

3.After the oil has drained, wipe the filter base surface and apply a film of new oil to the gasket of the replacement filter.

4.Install the new filter by hand, turning it three- quarters to one full turn after the filter gasket contacts the filter base surface.

5.Reinstall the filter guard. Torque screws to 65 in/lbs. each.

6.Repeat steps on the opposite side.

7.Drain old oil filters of all free flowing oil prior to disposal. Place used oil in appropriate containers and dispose of it in accordance with laws in your area.

8.Remove the top port plug (see illustration) from the left side and right side of the transaxles prior to filling with oil. This will allow the transaxles to vent during oil fill.

9.Remove the cap from the transaxles’ expansion tank located on the vehicle frame.

10.Fill with 20W50 motor oil until oil just appears at the bottom of each transaxles’ top port (approximately 2 quarts per transaxle, 4 quarts total). Install the top port lug into each transaxle as the oil level reaches the port.

11.Install and torque the top port plugs to 180 in./lbs.

12.Continue to fill the transaxles through the expansion tank until the FULL COLD line is reached (this will take approximately 23 additional ounces).

13.Reinstall the expansion tank cap by hand. Be careful to not overtighten.

2

3

1

8019-010

1.Filter guard

2.Transaxle filter

3.Top port plug EZT filter change

1

2

2

8019-012

1.Expansion tank

2.Transaxles EZT filter change

46

Page 45 Page 47
Page 46
Image 46
Husqvarna EZ24T/ 966659601, EZ4824/ 966612901, EZ4824 CA/ 966659501 warranty Transaxle Transmission Fluid Change
Page 45 Page 47

EZ4824 CA/ 966659501, EZ24T/ 966659601, EZ4824/ 966612901 specifications

The Husqvarna EZ24T (model 966659601), EZ4824 CA (model 966659501), and EZ4824 (model 966612901) are part of the innovative EZ range of zero-turn mowers designed for superior performance and ease of use. These models combine advanced technology, robust features, and ergonomic design, making them excellent choices for both residential and commercial lawn care.

One of the standout features of the Husqvarna EZ24T is its powerful engine, delivering high performance for efficient grass cutting. It's equipped with a reliable 24 HP engine, providing ample power for tackling thick grass and uneven terrain. This engine, paired with a large cutting deck, ensures that users can complete their mowing tasks more quickly and effectively.

The EZ4824 CA and EZ4824 offer similar power with their 48-inch cutting decks that provide excellent maneuverability, making it easy to navigate around flower beds, trees, and other obstacles. The decks are designed for superior airflow and grass clipping discharge, promoting a healthier lawn by ensuring even and clean cuts. The height adjustment feature allows operators to customize cutting heights easily, accommodating various grass types and weather conditions.

These models also incorporate advanced hydrostatic transmission, granting users smooth and responsive handling. The zero-turn capability enables users to make tight turns, enhancing efficiency, especially in residential settings with complex landscapes. The EZ range is built to offer comfort, featuring an adjustable padded seat and ergonomic armrests to reduce fatigue during extended mowing sessions.

Durability is a hallmark of the Husqvarna EZ series, with heavy-duty steel frames and reinforced cutting decks that withstand the rigors of continuous use. The user-friendly controls make operation intuitive, allowing both novices and experienced users to harness the full potential of these machines. Additionally, maintenance is simplified with easy access to critical components, ensuring that owners can keep their mowers in top condition.

Safety features are integrated into the design, including an automatic shut-off system that engages when the operator leaves the seat, significantly reducing the risk of accidents. With these models, Husqvarna further emphasizes its commitment to innovation, user satisfaction, and environmental stewardship, making them a sound investment for anyone looking to achieve a well-maintained lawn. In summary, the Husqvarna EZ24T, EZ4824 CA, and EZ4824 offer a unique blend of power, precision, and comfort, solidifying their place in the market for top-tier lawn care solutions.
Top Page Image Contents