Husqvarna EZ4824/ 966612901 Operation, Press in and turn the ignition key to the start position

OPERATION

8.Press in and turn the ignition key to the start position.

IMPORTANT INFORMATION

Do not run the starter for more than 5 seconds each time. If the engine does not start, wait approximately 10 seconds before retrying.

9.When the engine starts, immediately release the ignition key back to the run position.

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

10.Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, approximately mid throttle, for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING (no choke).

If your battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance section.)

8050-7432

Turn to the start position

8050-7432

Return to run position

8052-001

Set the engine speed

27