Husqvarna EZ4824/ 966612901 Operating On Hills, Do not drive up or down hills with, Operation

	OPERATION
5.	Move throttle control to full throttle.
6.	Engage the mower deck by pulling out the blade
	switch.
	The machine’s speed and direction are
	continuously variable using the two steering
	controls. When both controls are in the neutral
	position, the machine stands still.
	By moving both controls an equal amount forward
	or backward, the machine moves in a straight line
	forward or backward respectively.
	In order, for example, to turn right while moving
	forward, move the right control towards the neutral
	position. The rotation of the right wheel is reduced
	and the machine turns to the right.
	Turning on the spot (zero turn) can be achieved		8052-001
	by moving one control backward (behind the	Set blade engagement and throttle control
	neutral position) and carefully moving the other
	steering control forward from its neutral position.
Operating On Hills
Read Driving on Slopes in the Safety section.
	WARNING!
	Do not drive up or down hills with
	slopes greater than 10 degrees. Do
	not drive across slopes.
•	The slowest speed possible should be used
	before starting up or down hills.
•	Avoid stopping or changing speed on hills.		8061-026

• If stopping is absolutely necessary, pull drive	Place controls in neutral position
levers into the neutral position and push to the
outside of the unit and engage the parking brake.

•To restart movement, release the parking brake.

•Pull the control levers back to the center of the mower and press forward to regain forward motion.

•Make all turns slowly.

8058-020

Parking brake released

30