Husqvarna FS 520, FS 524, FS 513 Assembly, Position Water Tank, and route Water Tank Hose as

ASSEMBLY

4.Position Water Tank, and route Water Tank Hose as

shown in Diagram at right (FS 513). FS 520 / FS 524 do not use clamp shown in diagram.

5. Align rear bar and recessed area at rear of water tank.

•Press down firmly on water tank so it snaps in position onto rear bar.

•When properly installed, water tank should pivot freely on rear bar.

6.Disconnect existing water hose from blade guard. This is the water hose from water control valve mounted on saw.

20