Husqvarna FS 524, FS 513 Conformity Certificates, Husqvarna Construction Products North America

CONFORMITY CERTIFICATES

American National Standards Institute : For units used in the United States, this machine has been designed to comply with American National Standards Institute ANSI B7.1-2000, “Safety Requirements for the Use, Care and Protection of Abrasive Wheels”. This standard can be purchased by contacting the American National Standards Institute at the address shown below:

American National Standards Institute	Telephone: 212.642.4900
25 West 43rd Street, 4th floor	Fax: 212.398.0023
New York, NY 10036	www.ansi.org

CALIFORNIA AIR RESOURCES BOARD (CARB): This machine is considered a preempt Off-Road Ap- plication as relating to CARB standards. Under construction equipment, and in particular, as a concrete saw (Saws: concrete, masonry, cutoff), with engine power less than 19KW (25 hp), CARB standards do not apply to this machine.

For more information see the website http://www.arb.ca.gov/msprog/offroad/preempt.htm

EUROPEAN UNION (EU): For units used in countries that are members of the European Union (EU), this machine is designed to meet the EU directives as declared below.

HUSQVARNA CONSTRUCTION PRODUCTS

DECLARATION OF CONFORMITY WITH THE “SAFETY OF MACHINERY” DIRECTIVE

(Directive 98/37/EC) and the rules governing its transposition

MANUFACTURER

Husqvarna Construction Products North America

17400 West 119th Street, Olathe, Kansas 66061 USA

herewith declares that the machine(s) designed hereunder

FS 513, FS 520, FS 524

conforms to the “SAFETY OF MACHINERY” directive (98/37/EC), the “LOW VOLTAGE EQUIPMENT” directive (73/23/EEC), the “ELECTROMAGNETIC COMPATIBILITY” (EMC) directive (89/336/EEC) in accordance with European standards EN 50081/1 and EN 55022, and the “NOISE” directive (2000/14/EEC) in accordance with European standard EN ISO 3744.

16January2007, Olathe, Kansas USA

42