6. Menu functions

To:

Activate: Move the cursor to Time lock and press YES. Now move the cursor to Number of days and press YES. Specify how many days you would like the Automower to mow before it requests the PIN code. Finish by pressing YES.

When the selected number of days has elapsed, the Automower completes mowing and charges the battery. The message Enter PIN code is then shown on the display. You then enter your code and press YES.

Automower will now request the PIN-code each time the main switch is switched to ON.

Deactivate: Move the cursor to Time lock and press YES. Now move the cursor to OFF and press YES.

Stop protection (4-1-3)

This function means that the first number of the PIN code must be specified within 10 seconds after the STOP button has been pressed. If the correct number is not entered after three attempts, the alarm sounds. The alarm can then be stopped by entering the complete PIN code.

IMPORTANT INFORMATION

The alarm can be activated on the mower using the Stop protection function. It is recommended that this function is used.

To:

Activate: Move the cursor to Stop protection and press YES. Select ON to activate and press YES. Then specify for how long the alarm should sound, by answer the question Duration of alarm?.

Deactivate: Move the cursor to Stop protection and press YES. Select OFF to deactivate and press YES. When you select OFF, the alarm function is also deactivated.

PIN code

Time lock

Stop protection

Settings lock

4-1-3

ON

OFF

_ _ _min

Automower from

61

Page 61
Image 61
Husqvarna Robotic Lawn Mowe manual Stop protection