LUBRICATION
Lubrication
Lubrication Schedule
12/12 1/52 1/365
25h
50h 100h 200h 300h
Lubrication schedule
12/12 Every year 1/52 Every week 1/365 Every day
| |
Lubricate with grease gun | Lubricate with oil can |
Oil change | Level check |
Filter change |
|
General
Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it should be filled with engine oil.
When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulfide grease or another chassis or ball bearing grease offering good corrosion protection should be used.
For daily use, the machine shall be lubricated twice weekly. Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen, attempt to clean them with spirits. If the belt continues to slip after cleaning with spirits, it must be replaced. Gasoline or other petroleum products must not be used to clean belts.
