OPERATION
Reversing
Depress one operator presence lever and shift transmission to the reverse gear. Grip motion control levers before shifting gear.
To operate on hills
To operate on slopes is a dangerous mowing job. Read the Safety Instructions section “Driving on Slopes” on page 8.
WARNING!
Do not drive up or down hills with slopes greater than 10 degrees. And do not drive across any slopes.
•The slowest speed possible should be used before starting up or down hills.
•Avoid stopping or changing speed on hills.
•Make all turns slowly.
Mowing Tips
•Observe and mark rocks and other fixed objects in order to avoid collisions.
•The cutting deck should be properly leveled for best mowing performance. The blades should be parallel to the ground or slightly tipped down in the front.
•Only use sharp blades.
•Check tire pressure. Different pressure can cause uneven mowing results.
•The left hand side of the deck should be used for trimming.
Clutch drive before shifting gear
WARNING!
Clear the lawn of stones and other objects that can be thrown out by the blades.
