INSTALLING SPLASHGUARDS
The splashguard is shipped inside each mer-
chandiser. AFTER merchandisers have been lev-
eled and joined, and all drip piping, electrical
and refrigeration work has been completed,
re-install the front color panel, then install the
splashguards.
First, position top of splashguard over the top
edge of the bracket; second, push the lower edge
of the splashguard toward the bottom of the
bracket until it snaps into place.
Splashguards are joined with a galvanized
metal splice connector that comes with the
joint kit. Join the splashguards before
installing on case.
3-2 DRIP PIPING AND SPLASHGUARDS
P/N 0387183_D WWW.HUSSMANN.COM
1
2
Splashguard
Retaining
Bracket
Splashguard
Joint
Side
Detail
Splice Connector
Splashguard