Introduction

Regular maintenance is the best prevention for costly downtime or expensive, premature repair. The following pages contain suggested maintenance information and schedules which the operator should follow on a routine basis.

Remain alert for unusual noises, they could be signaling a problem. Visually inspect the machine for any abnormal wear or damage. A good time to detect potential problems is while performing scheduled maintenance service. Cor- recting the problem as quickly as possible is the best insurance.

Clear away heavy build-up of grease, oil and dirt, especially in the engine and hydraulic reservoir areas; minute dust particles are abrasive to close-tolerance engine and hydraulic assemblies.

Daily inspect mower for grass clippings and wire and string tangles. The underside of the mower deck will collect a build-up of grass clippings and dirt, especially when grass is wet or has high moisture content. This build-up will harden, restricting blade and air movement and will probably show a poorer quality of cutting. Therefore it should be removed routinely.

To do this it will be necessary to raise and block the deck in the full up position, using jack stands or blocks, and scrape the build-up from underneath.

Some repairs require the assistance of a trained service mechanic and should not be attempted by unskilled person- nel. Consult your Hustler service center when assistance is needed.

General engine maintenance

Detailed instructions and recommendations for break-in and regular maintenance are specified in the Engine Owner’s manual. Please refer to this manual for engine servicing, lubricating oil levels with quality and viscosity recom- mendations, bolt torques, etc. The engine warranty is backed by the manufacturer. Special attention should be paid to applicable data which will not be duplicated here.

Torque values

WARNING: Particular attention must be given to tightening the drive wheel lug nuts, wheel motor nuts and blade spindle bolts. Failure to correctly torque these items may result in the loss of a wheel or blade, which can cause serious damage or personal injury.

Torque values are given below:

Wheel (lug) nuts

65-75 FT.-LBS.

Wheel motor nut

350-375 FT.-LBS

Blade spindle bolt top

65-75 FT.-LBS.

Blade spindle bolt bottom

118 FT.-LBS.

Lug nuts only - It is recommended that these be checked after the first 2 hours of operation, initially, every 50 hours and following removal for repair or replacement.

For all other torques refer to the various tractor parts manuals for standard torque chart.

NOTE: For engine torque values, see engine owner’s manual.

Tires

It is important for level mowing that the tires have the same amount of air pressure. The recommended pressure are:

Drive Wheels

8-12 PSI

Front Wheels

8-12 PSI

Solid fill tires are not recommended for Hustler turf equipment. On any machine, with solid filled tires, the war- ranty claim will be denied.

10-16

109706 10/08

Page 130
Image 130
Hustler Turf Diesel Z manual Introduction, General engine maintenance Torque values, Tires

Diesel Z specifications

The Hustler Turf Diesel Z is a powerhouse in the world of commercial landscaping and residential mowing solutions. Designed with an eye for durability, efficiency, and ease of use, this zero-turn mower is equipped with a multitude of features that cater to both professional landscapers and serious homeowners.

One of the standout characteristics of the Diesel Z is its robust diesel engine. These engines offer superior torque and fuel efficiency, enabling extended operation periods without frequent refueling. With a torque-rich performance, users can tackle the toughest mowing conditions, from dense grass to uneven terrain, ensuring a clean and precise cut every time.

The design of the Diesel Z emphasizes operator comfort and control. It features an ergonomic seat with ample cushioning and lumbar support, allowing for extended use without discomfort. The fully adjustable lap bars and controls are intuitive, allowing even novice users to master operation quickly. The mower’s zero-turn capability allows for exceptional maneuverability, making it easy to navigate around obstacles and achieve that professional-looking finish in tight spaces.

Equipped with Hustler’s advanced cutting technology, the Diesel Z provides a premium mowing experience. Its cutting deck is engineered for optimal airflow, resulting in clean and evenly distributed grass clippings. Users can choose from various cutting options, with cutter heights that can be adjusted to suit different grass types and conditions.

For enhanced performance and durability, the Diesel Z is built with a rugged frame and high-quality materials. The solid construction ensures that it withstands the rigors of daily use, while the mower's maintenance-friendly design incorporates easily accessible components for routine service and care.

In terms of technology, the Hustler Turf Diesel Z also integrates advanced features such as LED lighting for improved visibility during low-light conditions and a fuel management system that optimizes performance. With a variety of deck sizes available, users can select the ideal configuration for their specific needs, further enhancing its versatility.

Lastly, the Diesel Z comes with a comprehensive warranty, underscoring Hustler’s commitment to quality and customer satisfaction. In a competitive market for zero-turn mowers, the Hustler Turf Diesel Z stands out as a reliable, efficient, and user-friendly option for anyone looking to upgrade their mowing experience. With its combination of power, comfort, and cutting-edge technology, it is truly a top choice for landscaping needs.