Viewed from right

 

 

 

side of unit

 

 

1.

Electric deck clutch

 

 

2.

Deck drive belt

 

 

3.

Fixed pulley

 

 

 

3

2

1

 

 

 

FIG. 46

Viewed from left

 

 

 

side of unit

 

 

1.

Pump belt

 

 

2.

Engine pulley

 

 

3.

Idler pulley

 

 

4.

Pump idler arm

 

 

5.

Pump pulley

 

 

6.

Pump idler spring

 

 

 

 

 

1

 

6

 

 

 

4

 

2

 

 

5

 

 

3

 

 

 

FIG. 47

WARNING: If the pump belt fails, loss of control will occur especially when operating on a slope. If you lose steering control while operating the machine, place the steering control levers in the park brake position immediately. Inspect the machine and involve your Hustler dealer to resolve the problem before continuing to operate.

Inspect these belts frequently for wear and serviceability. Replace a belt that shows signs of severe cuts, tears, sep- aration, weather checking and cracking, or burns caused by slipping. Slight raveling of belt covering does not indicate failure, trim ravelling with a sharp knife.

Inspect the belt pulley grooves and flanges for wear. A new belt, or one in good condition, should never run against the bottom of the groove. Replace the pulley when this is the case, otherwise belt will lose power and slip excessively.

Never pry a belt to get it on a pulley as this will cut or damage the fibers of the belt covering.

Keep oil and grease away from belts, and never use belt dressings. Any of these will destroy the belt composition in a very short time.

Mower blade maintenance

Check the mower blades daily, they are the key to power efficiency and well groomed turf. Keep them sharp, a dull blade will tear rather than cut the grass, leaving a brown ragged top on the grass within a few hours. A dull blade also requires more power from the engine.

Replace any blade which is bent, cracked or broken.

WARNING: Never attempt to straighten a bent blade by heating, or weld a cracked or broken blade as the blade may break and cause serious injury. Replace worn or damaged blades.

DANGER: Never work with blades while engine is running or deck clutch switch is engaged (on). Always place deck clutch switch in the disengaged position, place control levers in the park brake position and turn engine off and disconnect negative battery cable. Block up mower when you must work under it. Wear gloves when handling blades. Always check for blade damage if mower strikes rock, branch or other foreign object during mowing!

WARNING: Always wear adequate eye protection when grinding mower blades.

10-28

109706 10/08

Page 141 Page 143
Page 142
Image 142
Hustler Turf Diesel Z manual Mower blade maintenance
Page 141 Page 143

Diesel Z specifications

The Hustler Turf Diesel Z is a powerhouse in the world of commercial landscaping and residential mowing solutions. Designed with an eye for durability, efficiency, and ease of use, this zero-turn mower is equipped with a multitude of features that cater to both professional landscapers and serious homeowners.

One of the standout characteristics of the Diesel Z is its robust diesel engine. These engines offer superior torque and fuel efficiency, enabling extended operation periods without frequent refueling. With a torque-rich performance, users can tackle the toughest mowing conditions, from dense grass to uneven terrain, ensuring a clean and precise cut every time.

The design of the Diesel Z emphasizes operator comfort and control. It features an ergonomic seat with ample cushioning and lumbar support, allowing for extended use without discomfort. The fully adjustable lap bars and controls are intuitive, allowing even novice users to master operation quickly. The mower’s zero-turn capability allows for exceptional maneuverability, making it easy to navigate around obstacles and achieve that professional-looking finish in tight spaces.

Equipped with Hustler’s advanced cutting technology, the Diesel Z provides a premium mowing experience. Its cutting deck is engineered for optimal airflow, resulting in clean and evenly distributed grass clippings. Users can choose from various cutting options, with cutter heights that can be adjusted to suit different grass types and conditions.

For enhanced performance and durability, the Diesel Z is built with a rugged frame and high-quality materials. The solid construction ensures that it withstands the rigors of daily use, while the mower's maintenance-friendly design incorporates easily accessible components for routine service and care.

In terms of technology, the Hustler Turf Diesel Z also integrates advanced features such as LED lighting for improved visibility during low-light conditions and a fuel management system that optimizes performance. With a variety of deck sizes available, users can select the ideal configuration for their specific needs, further enhancing its versatility.

Lastly, the Diesel Z comes with a comprehensive warranty, underscoring Hustler’s commitment to quality and customer satisfaction. In a competitive market for zero-turn mowers, the Hustler Turf Diesel Z stands out as a reliable, efficient, and user-friendly option for anyone looking to upgrade their mowing experience. With its combination of power, comfort, and cutting-edge technology, it is truly a top choice for landscaping needs.
Top Page Image Contents