Hustler Turf Diesel Z manual

15.Be sure that adjuster is free to move up and down.

16.Tighten the adjuster bolt until the chain just becomes tight, making sure that the deck stays tight against the 3" block.

17.Tighten the adjuster bolt jam nut to prevent the adjuster bolt from moving (FIG. 65).

18.Tighten the hardware holding the chain and adjuster onto the deck lift arm.

DECK LIFT

THREADED ROD

DECK LIFT THREADED ROD

			NUT
						NUT
CHAINS		NUT
					CHAIN
	FIG. 63			FIG. 64

		FOOT PEDAL
5/16" BOLT
ADJUSTER	JAM NUT
	HARDWARE	NUTS
	FIG. 65	FIG. 66
	LIFT BLOCK	1"
		1"
		DECK LIFT ROD

FIG. 67

19.Go to the right rear of the tractor.

20.Make sure that there is still slack in the chain. If not, loosen the two nuts on the block holding the threaded rod until there is slack in the deck lift chain (FIG. 65).

21.Tighten the appropriate nut until the chain just becomes tight, making sure that the deck stays tight against the 3" block.

22.Tighten the other nut on the opposite side of the block, and jam them tightly together against the block.

10-36 109706 10/08