9-22
Cisco Systems IntelligentGigabit Ethernet Switch Modules for the IBMBladeCenter, Software Configuration Guide
24R9746
Chapter9 Configuring STP
Configuring Spanning-Tree Features
Configuring the Forwarding-Delay Time for a VLAN
Beginning in privileged EXEC mode, follow these steps to configure the forwarding-delay time for a
VLAN. This procedure is optional.
To return the switch to its default setting, use the no spanning-tree vlan vlan-id forward-tim e global
configuration command.
Configuring the Maximum-Aging Time for a VLAN
Beginning in privileged EXEC mode, follow these steps to configure the maximum-aging time for a
VLAN. This procedure is optional.
Command Purpose
Step1 configure terminal Enter global configuration mode.
Step2 spanning-tree vlan vlan-id forward-time
seconds
Configure the forward time of a VLAN. The forward delay is the
number of seconds a port waits before changing from i ts
spanning-tree learning and listening states to the forwarding state.
For vlan-id, you can specify a single VLAN identified by
VLAN ID number, a range of VLANs separated by a hyphen,
or a series of VLANs separated by a comma. Valid interfaces
include physical ports, VLANs, and port channels. The range
is 1 to 4094.
For seconds, the range is 4 to 30; the default is 15.
Step3 end Return to privileged EXEC mode.
Step4 show spanning-tree vlan vlan-id Verify your entries.
Step5 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Step1 configure terminal Enter global configuration mode.
Step2 spanning-tree vlan vlan-id max-age seconds Configure the maximum-aging time of a VLAN. The
maximum-aging time is the number of seconds a switch waits
without receiving spanning-tree configuration messages before
attempting a reconfiguration.
For vlan-id, you can specify a single VLAN identified by
VLAN ID number, a range of VLANs separated by a
hyphen, or a series of VLANs separated by a comma. Valid
interfaces include physical ports, VLANs, and port
channels. The range is 1 to 4094.
For seconds, the range is 6 to 40; the default is 20.
Step3 end Return to privileged EXEC mode.
Step4 show spanning-tree vlan vlan-id Verify your entries.
Step5 copy running-config startup-config (Optional) Save your entries in the configuration file.