B-7
Cisco Systems IntelligentGigabit Ethernet Switch Modules for the IBM BladeCenter, Software Configuration Guide
24R9746
AppendixB Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with the Flash File System
This example shows how to create a tar file. This command writes the contents of the new-configs
directory on the local flash device to a file named saved.tar on the TFTP server at 172. 20.10.30:
Switch# archive tar /create tftp:172.20.10.30/saved.tar flash:/new-configs
Displaying the Contents of a tar File
To display the contents of a tar file on the screen, use this privileged EXEC command:
archive tar /table source-url
For source-url, specify the source URL alias for the local or network file system. These options are
supported:
•For the local flash file system, the syntax is
flash:
•For the FTP, the syntax is ftp:[[//username[:password]@location]/directory]/tar-filename.tar
•For the RCP, the syntax is rcp:[[//username@location]/directory]/tar-filename.tar
•For the TFTP, the syntax is tftp:[[//location]/directory]/tar-filename.tar
The tar-filename.tar is the tar file to display.
You can also limit the display of the files by specifying an optional list of files or directories after the
tar file; then only these files are displayed. If none are specified, all files and directories are displayed.
This example shows how to display the contents of the cigesm-i6q4l2-mz.121 - 21.EA1.tar file that is in
flash memory:
Switch#archive tar /table flash:cigesm-i6q4l2-mz.121-21.EA1.tar
info (219 bytes)
cigesm-i6q4l2-mz.121-21.EA1/(directory)
cigesm-i6q4l2-mz.121-21.EA1/html/(directory)
cigesm-i6q4l2-mz.121-21.EA1/html/foo.html (0 bytes)
cigesm-i6q4l2-mz.121-21.EA1/cigesm-i6q4l2-mz.121-21.EA1.bin (610856 bytes)
cigesm-i6q4l2-mz.121-21.EA1/info (219 bytes)
info.ver (219 bytes)
This example shows how to display only the cigesm-i6q4l2-mz.121-21.EA1/ht ml directory and its
contents:
Switch#archive tar /table flash:cigesm-i6q4l2-mz.121-21.EA1/html
cigesm-i6q4l2-mz.121-21.EA1/html/(directory)
cigesm-i6q4l2-mz.121-21.EA1/html/foo.html (0 bytes)
Extracting a tar File
To extract a tar file into a directory on the flash file system, use the privileged EXEC command:
archive tar /xtract source-url flash:/file-url [dir/file...]
For source-url, specify the source URL alias for the local file system. The se options are supported:
•For the local flash file system, the syntax is
flash:
•For the FTP, the syntax is ftp:[[//username[:password]@location]/directory]/tar-filename.tar
•For the RCP, the syntax is rcp:[[//username@location]/directory]/tar-filename.tar
•For the TFTP, the syntax is tftp:[[//location]/directory]/tar-filename.tar
The tar-filename.tar is the tar file from which to extract files.