22-14
Cisco Systems IntelligentGigabit Ethernet Switch Modules for the IBMBladeCenter, Software Configuration Guide
24R9746
Chapter22 Configuring Network Security with ACLs
Configuring ACLs
When making the standard and extended ACL, remember that, by default, the end of the ACL contains
an implicit deny statement for everything if it did not find a match before reaching the end. For standard
ACLs, if you omit the mask from an associated IP host address access list specification, 0.0.0.0 is
assumed to be the mask.
After you create an ACL, any additions are placed at the end of the list. You cannot selectively add ACEs
to a specific ACL. However, you can use no permit and no deny commands to remove ACEs from a
named ACL. This example shows how you can delete individual ACEs from a named ACL:
Switch(config)# ip access-list extended border-list
Switch(config-ext-nacl)# no permit ip host 10.1.1.3 any
Being able to selectively remove lines from a named ACL is one reason you might use named ACLs
instead of numbered ACLs.
After creating an ACL, you must apply it to a line or interface, as described in the “Applying ACLs to
Terminal Lines or Physical Interfaces” section on page 22-18.
Applying Time Ranges to ACLs
You can implement extended ACLs based on the time of day and week by using the time-range global
configuration command. First, define the name and times of the day and week of the time range, and then
reference the time range by name in an ACL to apply restrictions to the access list. You can use the time
range to define when the permit or deny statements in the ACL are in effect. The time-range keyword
and argument are referenced in the named and numbered extended ACL task tables in the “Creating
Standard and Extended IP ACLs” section on page 22-7, and the “Creatin g Named Standard and
Extended ACLs” section on page 22-12.
These are some of the many benefits of using time ranges:
•You have more control over permitting or denying a user access to resources, such as an application
(identified by an IP address mask pair and a port number).
•You can control logging messages. ACL entries can log traffic at certain times of the day, but not
constantly. Therefore, you can simply deny access without having to analyze many logs generated
during peak hours.
Note The time range relies on the switch system clock. Therefore, you need a reliab le clock source. We
recommend that you use Network Time Protocol (NTP) to synchronize the switch clock. For more
information, see the “Managing the System Time and Date” section on page 4-1.
Step5 show access-lists [number | name] Show the access list configuration.
Step6 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose