A-3
Cisco Systems IntelligentGigabit Ethernet Switch Modules for the IBM BladeCenter, Software Configuration Guide
24R9746
AppendixA Supported MIBs
Using FTP to Access the MIB Files
Using FTP to Access the MIB Files
To access the Management Information Base (MIBs) for the Cisco Systems Intelligent Gigabit Ethernet
Switch Module, follow these steps:
1. Go to the IBM web site:
http://www.ibm.com/support.
2. Click Support & downloads > Downloads and drivers > BladeCenter (Blades) > BladeCenter
chassis Hardware only > Firmware.
3. Click Cisco Systems Intelligent Gigabit Ethernet Switch Module Firmware update - IBM
BladeCenter.
4. Find and click the MIBs link.
5. Click Download now to save the file to your computer.
6. Use PKUNZIP to expand the files on your computer.
7. From your computer you can ftp the files to your switch.