IBM 206 manual Rear view

Rear view

The following illustration shows the connectors on the rear of the server.

Power cord

Mouse

Keyboard

Parallel

Serial 1

Video

USB 1

USB 2

Ethernet

Serial 2

2 1

Power-cord connector

Connect the power cord to this connector.

Mouse connector

Connect a mouse or other PS/2® device to this connector.

Keyboard connector

Connect a PS/2 keyboard to this connector.

Parallel connector

Connect a parallel device to this connector.

Serial 1 connector

Connect a 9-pin serial device to this connector.

Serial 2 connector

Connect a 9-pin serial device to this connector.

USB 1 connector

Connect a USB device to this connector.

USB 2 connector

Connect a USB device to this connector.

Ethernet connector

Use this connector to connect the server to a network.

Video connector

Connect a monitor to this connector.

If you have an optional Remote Supervisor Adapter II (systems-management adapter) installed in PCI-X slot 2, your server has additional connectors and LEDs. See the Option Installation Guide for more information about these connectors and LEDs. In addition, if you install the optional Remote Supervisor Adapter II, you must disconnect the video cable from the system board and connect it to the optional Remote Supervisor Adapter II.

Chapter 1. Introducing the xSeries 206 Type 8482 server 11