Turning off the server
When you turn off the server and leave it connected to ac power, the server can respond to remote requests to turn on the server. To remove all power from the server, you must disconnect it from the power source.
Some operating systems require an orderly shutdown before you turn off the server. See your
Statement 5:
CAUTION:
The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
2 
1 
The server can be turned off in any of the following ways:
vYou can turn off the server from the operating system, if your operating system supports this feature. After an orderly shutdown of the operating system, the server will be turned off automatically.
vYou can press the
vIf the operating system stops functioning, you can press and hold the
vIf an optional Remote Supervisor Adapter II is installed in the server, the server can be turned off from the Remote Supervisor Adapter II user interface.
vIf the Wake on LAN feature turned on the server, the Wake on LAN feature can turn of the server.
vThe server can turn itself off as an automatic response to a critical system
failure.
