IBM 206 - page 30

the full Configuration/Setup Utility menu. If a supervisor password is set, the
full Configuration/Setup Utility menu is available only if you type the supervisor
password at the password prompt. See “Supervisor password” on page 19 for
more information.
v
Advanced Setup
Select this choice to change settings for advanced hardware features.
Important: The server might malfunction if these options are incorrectly
configured. Follow the instructions on the screen carefully.
This choice is on the full Configuration/Setup Utility menu only.
– PCI Configuration
Select this choice to view the system resources that are used by the installed
PCI or PCI-X devices.
– Advanced Chipset Feature
Select this choice to modify settings that control features of the core chip set
on the system board.
Attention: Do not make changes in the Advanced Chipset Feature option
unless directed to do so by an IBM authorized service representative.
– Advanced Processor Options
Select this choice to enable or disable the microprocessor cache and
Hyper-Threading Technology. The default status for Hyper-Threading
Technology is Enabled.
Attention: Do not make changes in the Advanced Processor Control
option unless directed to do so by an IBM authorized service representative.
– ASF Configuration
Select this choice to enable or disable the Alert Standard Format (ASF)
feature on your server.
– Remote Console Redirection
Select this choice to enable and configure serial remote video and keyboard
redirection.
v Power Management
Select this choice to enable or disable system power settings. This includes
automatic power-on settings such as the Wake on LAN feature.
v Error Log
Select this choice to view or clear error logs.
– POST Error Log
Select this choice to view the three most recent error codes and messages
that the system generated during POST. Select Clear all DMI event logs to
clear the POST error log.
v Save Settings
Select this choice to save the changes you have made in the settings.
v Restore Settings
Select this choice to cancel the changes you have made in the settings and
restore the previous settings.
v Load Default Settings
Select this choice to cancel the changes you have made in the settings and
restore the factory settings.
v Exit Setup
18 xSeries 206 Type 8482: User’s Guide