IBM 22P6415 manual BOOTP IP Table, IBM High Rate Wireless LAN Gateway User’s Guide

2.Click Add to add a new entry in the Excluded IP table.

vIP Address: Enter the specified IP address. The IP address must be within the address pool of the DHCP server.

vRemark: The descriptions of the excluded IP address

3.Click Apply. A new entry is added to the Excluded IP table.

Note: The configuration changes made through the Web-based setup utility are automatically saved into the flash memory within 30 seconds after clicking Apply.

BOOTP IP Table

These are IP addresses reserved for the user using a BOOTP protocol to get an IP address. The IP address must be within the address pool. To specify an IP address to be used by the BOOTP protocol, do the following:

1.Click Advanced Configuration → DHCP Configuration → BOOTP IP to display the BOOTP IP table.

5-4IBM® High Rate Wireless LAN Gateway: User’s Guide