IBM 22P6415 manual URL rule, 5-13

2.Click Add to add an entry into the Port rule table. v Service Type: TCP or UDP service

vProtocol: Select the protocol (or application) such as FTP or HTTP. If a well-known protocol is selected from the list, then the corresponding port number is set according to various Internet standards. The Port Edit box is disabled. Click User-Definedto specify a protocol not found in the list.

vPort: Specifies the TCP or UDP port number. Use this field if the protocol (or application) is not found in the list or a non-default port number is used.

Note: This blocks all users on the LAN from accessing this port to the Internet.

3.Click Apply. The Port rule table has a new entry added to it. Repeat steps 2 and 3 to block more Web sites using the port rule.

Note: The configuration changes made through the Web-based setup utility are automatically saved into the flash memory within 30 seconds after clicking Apply.

URL rule

To filter packets using the URL rule, do the following:

Part 5: Using tools for advanced configuration 5-13