Block or Allow: You can list specific MAC addresses to block or allow in this window. Blocking a specific MAC address will allow everyone else with the correct settings to access the LAN and the Gateway. Allowing a specific MAC address will allow only that MAC address access to the LAN and Gateway as long as WEP and ESSID are correct.
Wireless Settings - Status Monitor
The Status monitor is an advanced function for experts only. Click Status monitor in the
IEEE 802.11b Wireless LAN Access Point General Information
vMAC Address (BSS ID):
vFrequency Domain
vStatistics
vWireless Transmit
vWireless Receive
vFragments: 0
vFragments: 0
vUnicast Packets: 0
vUnicast Packets: 0
vUnicast Bytes: 0
vUnicast Bytes: 0
Part 3: Setting up the wireless access point in the IBM High Rate Wireless LAN Gateway