Click Advanced Configuration → MAC address clone to display the MAC address clone page.
Select one of the following:
vAuto acquire from first connected PC. Make sure the PC with the desired MAC address is the only PC connected to the Gateway. Then select auto acquire and click on Apply.
vManual configuration. Manually enter the desired MAC address
vReset to Default. This will reset the MAC address to the factory default.
Packet filtering
By default, all users can access all services on the Internet. With packet filtering, the network Administrator can block users from specific sites or applications on the Internet.
Note: The type of packet filtering used by the Gateway is not the same as the packet filtering used by the
To configure packet filtering, click Advanced Configuration, and then click Packet Filtering Configuration to display the Packet Filtering table.
