IBM 22P9176 manual Configuration 1 self power AC adapter configuration, Requirements

Configuration 1: self power (AC adapter) configuration

The Multi-Burner is usually used with the self power (AC adapter) configuration.

Requirements

vStandard USB cable and power cable assembly (shipped with this option); IBM Part Number 22P9188

vAC adapter (shipped with this option)

Specifications

Read and write CD and DVD media are supported.

Connecting the Multi-Burner using configuration 1

To connect the Multi-Burner to your system, complete the following procedure. Refer to Figure 1-1during installation.

Figure 1-1. Configuration 1: self power (AC adapter) configuration

1.Turn on your computer.

2.	Using the USB cable	, insert the cable plug		into the USB connector of
	the drive while squeezing the two buttons on the connector.
3.	Plug the standard USB connector		into the USB port of your computer.
4.	Connect the AC adapter to the DC IN connector			on the Multi-Burner.
	Note: USB cable	is not required for this configuration.

Chapter 1. Multi-Burner quick install 1-3