IBM 22P9176 manual Configuration 3 auxiliary USB power configuration

Configuration 3: auxiliary USB power configuration

The auxiliary USB bus power configuration can be used on select IBM ThinkPad computers equipped with the IBM powered USB 2.0 port.

Requirements

vIBM powered USB 2.0 cable assembly (shipped with this option); IBM Part Number 22P9189

vIBM powered USB 2.0 port

Specifications

Read and write CD and DVD media are supported.

Connecting the Multi-Burner using configuration 3

To connect the Multi-Burner to your system, complete the following procedure. Refer to Figure 1-3during installation.

Figure 1-3. Configuration 3: auxiliary USB power configuration

1.Turn on your computer.

2.	Using the USB cable	, insert the cable plug			into the USB connector of
	the drive while squeezing the two buttons on the connector.
3.	Slide the two connectors		together and insert the stacked USB and auxiliary
	power connector into the powered USB 2.0 port on your computer (found on
	select IBM ThinkPad systems).
4.	Connect the other end of the cable			to the drive by inserting the plug

into the DC IN connector on the Multi-Burner.

1-6IBM USB 2.0 Portable Multi-Burner: User’s Guide