Removing the cover

Important:

Read “Important safety information” on page v and “Handling static-sensitive devices” on page 27 before removing the cover.

To remove the cover:

1.Shut down your operating system, remove any media (diskettes, CDs, or tapes) from the drives, and turn off all attached devices and the computer.

2.Unplug all power cords from electrical outlets.

3.Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer.

4.Press the buttons on the sides of the computer and pivot the rear end of the cover up toward the front of the computer.

Chapter 2. Types 8128, 8187, 8188, 8193, 8414, and 8431 31

Page 47
Image 47
IBM 8188, 8128, 8185, 8189, 8186, 8187, 8190 manual Removing the cover