IBM Computer Monitor manual Installing the Windows 98 device driver

Installing the Windows 98 device driver

Windows 98 automatically detects the new monitor and displays the Add New Hardware Wizard dialog box if the device driver is not already installed.

1.Insert the Device Driver and User’s Guide CD into the computer CD-ROM drive, and click Next> twice when the Add New Hardware Wizard window opens.

2.Click the CD-ROM drive box to install the device drivers from the CD and then click Next>.

3.Confirm that the device driver was found on the CD, and click Next> twice to install the device driver.

4.Click Finish to exit the Add New Hardware Wizard dialog box.

To manually install or update the device driver for the Microsoft Windows 98 operating system, perform the following steps:

1.Click Start → Settings → Control Panel and then double-click

Display.

2.In the Display Properties window, click the Settings tab, and then click Advanced.

3.Click the Monitor tab, and then click Change.

4.When the Update Device Driver Wizard window opens, follow the steps in the previous paragraph.

5.Remove the User’s Guide and Installation Files CD from the computer CD-ROM drive.

Installing the Windows 95 device driver

Right-click the My computer icon on the computer desktop and then select Properties → System to view the version number listed in the System window. Perform the steps below for the appropriate version.

If you have Windows 95 Version 4.00.950A, use the following steps to manually install or update the device driver:

1.Click Start → Settings → Control Panel and then double-clickDisplay.

9